Equipment and Calibration
Equipment history at Tonzi| ALL | | Anemometer || Barometer || Battery Bank || Camera || CO2 Probe || Data Logger || Forced Diffusion || Gas Analyzer || Heat Flux Plate || Infrared Temperature || Interface || LED sensor || Moisture Point || Multiplexer || Narrow Band || Net Radiometer || PAR Sensor || Precipitation || Radio || RH & Temp || Soil Moisture Probe || Soil Water Potential || Solar Controller || Solar Panel || Water Level || Weather Station |
SELECT a.recno, a.eh_date, a.eh_loc1, a.eh_loc2, IF(a.eh_loc2=:loc, a.eh_locref2, a.eh_locref1) AS ref, a.eh_locref2, a.eh_title, a.eh_notes, a.eh_id, b.serialno, b.equip, b.modelno FROM equiphist a INNER JOIN equiplist b ON a.eh_id=b.recno WHERE (a.eh_loc1=:loc1 OR a.eh_loc2=:loc2) AND b.equip=:eq ORDER BY b.serialno, a.eh_date
Date | Serial No. | Model | Action | Ref | Notes |
---|---|---|---|---|---|
Radio | |||||
2012-01-09 | 1131631861 | Raven XT | Installed | Installed in the Campbell Enclosure at SP1 inside the soil co2 fence. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. | |
2017-03-02 | 21519 | RF400 | Removed | Removed from the Tower computer box. The radio link stopped working in the field and I plan to use the old MD9 to replace it anyway. | |
2017-03-02 | 21520 | RF400 | Removed | Removed from the soil co2 box. The radio link stopped working in the field and I plan to use the old MD9 to replace it anyway. | |
2020-03-02 | 32468 | RF401 | Installed | Radio IRT | Installed on the CR1000 for the small tree IRT system. |
2024-04-22 | 32468 | RF401 | Removed | Radio IRT | Removed from the IRT tripod because cows had chewed the wires off. |
2024-06-04 | 32468 | RF401 | Installed | Radio IRT | Reinstalled at the little tree northeast of the Tower at Tonzi after having been removed to repair massive cable damage from cows |
2019-03-11 | 34362 | RF401 | Installed | Installed in the Tower computer box to connect the computer to the remote data loggers. | |
2012-01-09 | 35754 | RF401 | Installed | Installed in the Campbell Enclosure at SP3 southeast of the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. | |
2018-12-19 | 35754 | RF401 | Removed | Removed from the OSU SP3 system to test out data collection by LattePanda in the lab. | |
2019-03-11 | 35754 | RF401 | Installed | Installed in the OSU SP3 box to connect to the Tower computer. | |
2012-01-09 | 35785 | RF401 | Installed | Installed in the Campbell Enclosure at SP1 inside the soil co2 fence. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. | |
2018-12-19 | 35785 | RF401 | Removed | Removed from the OSU SP1 system to test out data collection by LattePanda in the lab. | |
2019-04-16 | 35785 | RF401 | Installed | Install in the OSU SP1 box near the soil co2 system to connect the CR3000 to the Tower computer. Using Pakbus mode at 38400 | |
2012-01-09 | 35787 | RF401 | Installed | Installed in the Campbell Enclosure at SP2 near the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. | |
2022-02-09 | 5A0331744701B101 | LX40-NA-WIFI | Installed | Radio Cell Modem | Add to the Tower top data logger box to provide remote connection. |