Equipment and Calibration
Equipment history at Tonzi| ALL | | Anemometer || Barometer || Battery Bank || Camera || CO2 Probe || Data Logger || Forced Diffusion || Gas Analyzer || Heat Flux Plate || Infrared Temperature || Interface || LED sensor || Moisture Point || Multiplexer || Narrow Band || Net Radiometer || PAR Sensor || Precipitation || Radio || RH & Temp || Soil Moisture Probe || Soil Water Potential || Solar Controller || Solar Panel || Water Level || Weather Station |
SELECT a.recno, a.eh_date, a.eh_loc1, a.eh_loc2, IF(a.eh_loc2=:loc, a.eh_locref2, a.eh_locref1) AS ref, a.eh_locref2, a.eh_title, a.eh_notes, a.eh_id, b.serialno, b.equip, b.modelno FROM equiphist a INNER JOIN equiplist b ON a.eh_id=b.recno WHERE (a.eh_loc1=:loc1 OR a.eh_loc2=:loc2) AND b.equip=:eq ORDER BY b.serialno, a.eh_date
Date | Serial No. | Model | Action | Ref | Notes |
---|---|---|---|---|---|
PAR Sensor | |||||
2004-04-30 | 010159 | PAR-LITE | Installed | PAR Sensor Incoming Cal | Installed on the radiation boom in the incoming position for inter-comparison with the existing Licor Quantum sensor. |
2010-03-16 | 010161 | PAR-LITE | Installed | Installed at the request of Hideki in an unshaded opening near the east end of the radiation tram at Tonzi. This sensor is pointing upward collecting incoming PAR. | |
2011-02-03 | 010161 | PAR-LITE | Removed | Removed from the open space near the floor solar panels. | |
2010-03-16 | 010163 | PAR-LITE | Installed | Installed at the request of Hideki in an unshaded opening near the east end of the radiation tram. This sensor is pointed downward collecting reflected PAR. | |
2011-02-03 | 010163 | PAR-LITE | Removed | Removed from the open space near the floor solar panels. | |
2021-04-01 | 010164 | PAR-LITE | Location | PAR Sensor Incoming | Location for sensors currently at Tonzi |
2021-10-06 | 010164 | PAR-LITE | Removed | PAR Sensor Incoming | Removed from Tonzi-Tower due to bad readings from a broken wire. Replaced by sn 110340. |
2023-06-16 | 010164 | PAR-LITE | Installed | none | Installed at the tower top as part of the Arduino RSB diffuse PAR prototype to compare with the BF5 |
2023-07-06 | 010164 | PAR-LITE | Removed | Removed from the Tower Top where it was part of the Arduino based RSB diffuse PAR prototype | |
2004-04-30 | 030382 | PAR-LITE | Installed | PAR Sensor Reflected Cal | Installed on the radiation boom for comparison with existing Licor Quantum sensor |
2021-04-01 | 030382 | PAR-LITE | Location | PAR Sensor Reflected | Location for sensors currently at Tonzi |
2022-10-20 | 030382 | PAR-LITE | Removed | PAR Sensor Reflected | Removed from Tonzi due to random spikiness. Replaced by sn 990025. |
2020-04-18 | 110340 | PQS 1 | Installed | PAR Sensor Under-A | The PAR sensor was installed at Tonzi on the z-cam 1 post to measure below canopy PAR. It is connected the the fmet CR23x |
2021-08-11 | 110340 | PQS 1 | Removed | PAR Sensor Under-A | Removed from Tonzi near z-cam 2 because the data seems not so useful. |
2021-10-06 | 110340 | PQS 1 | Installed | PAR Sensor Incoming | Installed at Tonzi to replace sn 010164 due to bad readings from a broken wire. |
2001-05-20 | 990017 | PAR-LITE | Installed | Installed on the Tower top in the reflected PAR location with the initial set up of the site | |
2001-05-20 | 990019 | PAR-LITE | Installed | Installed on the Tower Top in the incoming PAR position. | |
2001-05-20 | 990021 | PAR-LITE | Installed | Installed on the Tower top as a calibration sensor | |
2022-10-20 | 990025 | PAR-LITE | Installed | PAR Sensor Reflected | Installed at Tonzi to replace sn 030382 that has been spiky. |
2021-01-21 | 990031 | PAR-LITE | Installed | none | Installed as part of the inter-comparison kit to test PAR, AirT and RH on the top of the Tower. |
2021-02-10 | 990031 | PAR-LITE | Removed | PAR Sensor Incoming Cal | Removed from Tonzi Tower after three weeks of inter comparison with the AMP standard |
2001-05-07 | LQ1570 | Line Quantum | Moved | none | Moved from Vaira to Tonzi |
2016-07-07 | LQ1570 | Line Quantum | Removed | Discovered buried in grass and soil near the other floor sensors after years of being missing. Brought in to be cleaned up and tested. | |
2001-09-07 | Q29881 | LI-190SA | Installed | PAR Sensor Incoming | Installed on the Tower top in the incoming position |
2007-01-19 | Q29881 | LI-190SA | Removed | PAR Sensor Incoming | Removed from Tonzi Tower top. |
2001-09-07 | Q29892 | LI-190SA | Installed | Installed on the Tower top in the outgoing position | |
2007-01-19 | Q29892 | LI-190SA | Removed | Removed from Tonzi Tower top. |