Equipment and Calibration
Equipment history at Mayberry| ALL | | Anemometer || Barometer || Battery Bank || Camera || CH4 Probe || CO2 Probe || CO2 Transmitter || Conductivity Sensor || Data Logger || DO Sensor || Fluorometer || Forced Diffusion || Gas Analyzer || Heat Flux Plate || Infrared Temperature || Interface || LED sensor || Multiplexer || Narrow Band || Net Radiometer || PAR Sensor || Precipitation || Range Finder || RH & Temp || Soil Moisture Probe || Solar Controller || Solar Panel || Water Level |
SELECT a.recno, a.eh_date, a.eh_loc1, a.eh_loc2, IF(a.eh_loc2=:loc, a.eh_locref2, a.eh_locref1) AS ref, a.eh_locref2, a.eh_title, a.eh_notes, a.eh_id, b.serialno, b.equip, b.modelno FROM equiphist a INNER JOIN equiplist b ON a.eh_id=b.recno WHERE (a.eh_loc1=:loc1 OR a.eh_loc2=:loc2) AND b.equip=:eq ORDER BY b.serialno, a.eh_date
| Date | Serial No. | Model | Action | Ref | Notes |
|---|---|---|---|---|---|
| Camera | |||||
| 2021-06-09 | 0030F4D214A4 | SD130BN | Installed | none | Installed on wooden post below Canon camera for a camera intercomparison |
| 2022-03-31 | 0030F4D214A4 | SD130BN | Removed | Removed from Mayberry with the end of the camera inter-comparison | |
| 2021-04-27 | RPI0W-003 | RPI0W | Installed | Camera | Swapped in a regular camera lens and installed on NW scaffolding corner, pointing ~west. This will be an intercomparison with the Canon camera for a while since some Canon images have been underexposed. |
| 2021-08-04 | RPI0W-003 | RPI0W | Removed | Removed from MB during a pause in the camera intercomparison. We plan to reinstall the camera after updating the firmware to skip nighttime photos. | |
| 2021-09-15 | RPI0W-003 | RPI0W | Installed | none | Installed at MB on the wooden post next to the Stardot camera to continue the camera intercomparison. Joe has updated the firmware so the camera skips nighttime photos and takes a concurrent photo with fixed white balance (and maybe other improvements?) |
| 2021-11-04 | RPI0W-003 | RPI0W | Removed | Removed from MB and brought back to the lab for repair. It wouldn't turn on, probably because of all the repeated power cycling. I think it ended up being a bad/corrupted microSD card. I set up the camera with a fresh microSD card. | |
| 2021-12-01 | RPI0W-003 | RPI0W | Installed | none | Installed on the wooden 4x4 on the southeast corner of the scaffolding and looking west. |
| 2023-01-03 | RPI0W-003 | RPI0W | Removed | Camera | Removed from the Mayberry tower because its web server was not booting. Brought back to the lab for further testing. |
| 2023-01-06 | RPI0W-003 | RPI0W | Installed | Camera | Redeployed at Mayberry on the same spot, attached to the wooden post on the southeast corner of the scaffolding. |