Equipment and Calibration

Equipment history at Tonzi

| ALL | | Anemometer || Barometer || Battery Bank || Camera || CO2 Probe || Data Logger || Forced Diffusion || Gas Analyzer || Heat Flux Plate || Infrared Temperature || Interface || LED sensor || Moisture Point || Multiplexer || Narrow Band || Net Radiometer || PAR Sensor || Precipitation || Radio || RH & Temp || Soil Moisture Probe || Soil Water Potential || Solar Controller || Solar Panel || Water Level || Weather Station |

SELECT a.recno, a.eh_date, a.eh_loc1, a.eh_loc2, IF(a.eh_loc2=:loc, a.eh_locref2, a.eh_locref1) AS ref, a.eh_locref2, a.eh_title, a.eh_notes, a.eh_id, b.serialno, b.equip, b.modelno FROM equiphist a INNER JOIN equiplist b ON a.eh_id=b.recno WHERE (a.eh_loc1=:loc1 OR a.eh_loc2=:loc2) AND b.equip=:eq ORDER BY b.serialno, a.eh_date

Date Serial No. Model Action Ref Notes
Anemometer
2015-04-08 0839 425A Installed Installed at ~2.0m agl in a wind profile near the Floor tower.
2015-12-23 0839 425A Removed Removed from the 3rd from bottom location of the wind profile near the Floor tower.
2015-04-08 0843 425A Installed Installed at 5.42m agl in a wind profile near the Floor tower.
2015-12-23 0843 425A Removed Removed from the 2nd from top location of the wind profile near the Floor tower.
2015-04-08 0846 425A Installed Installed at 7.56m agl in a wind profile near the Floor tower.
2015-12-23 0846 425A Removed Removed from the top location of the wind profile near the Floor tower.
2015-04-08 0852 425A Installed Installed at ~1.2m agl in a wind profile near the Floor tower.
2015-12-23 0852 425A Removed Removed from the bottom location of the wind profile near the Floor tower.
2015-04-08 0854 425A Installed Installed at ~0.1m agl in a wind profile near the Floor tower.
2015-04-08 0860 425A Installed Installed at 3.89m agl in a wind profile near the Floor tower.
2015-04-29 0860 425A Removed Removed from the 3.89m location on the wind profile due to bad data. This is the sonic the was banged previously.
Export to BADM