Site: Bouldin Alfalfa (US-Bi1)
No description found
Last field site visit:
| 2024-11-06 11:50:00 | Windy day, swapped 7500 for calibration, no wheat sprouts yet |
Equipment installed at the site:
Arable Weather Station Mark 3
Arable Weather Station Mark II
Campbell Sci. Multiplexer AM16/32B
Campbell Sci. Multiplexer AM25T
Campbell Sci. Data Logger CR1000
Campbell Sci. Soil Moisture Probe CS655
Campbell Sci. Interface NL115
Decagon-METER Narrow Band SRS-Ni NDVI
Delta-T Soil Moisture Probe ML3
Fabricated Battery Bank BB-Fab
Gill Anemometer WM 1590
Hukseflux Heat Flux Plate HFP01
Hukseflux Net Radiometer NR01
Kipp & Zonen Net Radiometer NR-LITE
Kipp & Zonen PAR Sensor PAR-LITE
Kipp & Zonen PAR Sensor PQS 1
LCJ Capteurs Anemometer SONIC-ANEMO-SPE10
Licor Gas Analyzer LI-7500A
StarDot Camera SD500BN-NL
TE Technology Heat Flux Plate HP-127-1.0-1.3-71P
Texas Electronics Precipitation TE525MM
Vaisala RH & Temp HMP155
Data Streams:
| Code | Description |
|---|---|
| BA_met | Micromet data from the Bouldin Alfalfa site recorded by a CR1000 as 30min averages of 10sec samples. |
| BA_flux | 30min averages of high frequency flux data from Licor GHG files |
| BA_cam | Digital number data from Pheoncamera at Bouldin Alfalfa |
| BA_arable | Hourly met data from an Arable Mark device. Raw times are in UTC, hourly averages with the time at the beginning of the averaging period beginning 20190401 changed to 30min data PST at end of averaging period. - stored in PST at end of averaging period. |
| BA_fd | Soil respiration data at BA from the second generation Forced Diffusion chamber from Eosense. The raw data is collected at 5min intervals and averaged to 30min values. The chamber is located under the tower. Alfalfa was removed from inside the chamber. |
| BA_processed | Fluxes and derived values from Level 1 processing |
| BA_processed3 | Gap filling and partitioned data from Level 3 processing |
| BA_fdb | Soil CO2 flux from an Eosense Forced Diffusion Chamber, 2nd chamber added under BA tower |
| BA_irtsr | Surface temperature from two Apogee IRT sensors one pointing north and the other south at a 45 deg inclination. These are recorded at both 2Hz and 30min averages for surface renewal by Kevin Tu. |
| BA_edgeli75 | Upper sonic and CO2/H2O data from BA Edge tower |
| BA_bncrli75 | Upper sonic and CO2/H2O data from BA Bouncer tower |
| BA_bncr23x | 30-min averages of met data from BA Bouncer CR23X |
| BA_edgecr6 | Lower sonic at BA Edge tower |
| BA_bncrcr6 | Lower sonic at BA Bouncer tower |
| BA_edge23x | 30-min averages of met data from BA Edge CR23X |
| BA_adexcr1k | 30-minute averages of data from CR1000 on the main BA tower measuring the upper and lower sonics |
| BA_adextrh | 30-minute averages of temperature and RH data from the main BA met CR1000 |
| BA_edgetrh | 30min averages from 10sec lower and upper T/RH readings at BA Edge tower |
| BA_bncrtrh | 30min averages from 10sec lower and upper T/RH readings at BA Bouncer tower |
| BA_sentek | Soil data from the 1m long Sentek probe connected to the Arable. Original data is hourly average with UTC timestamp at the beginning of the averaging period. The times have been adjusted back 7.5 hours to the middle of the averaging period in local standard time and linearly interpolated to 30min intervals. |