Biomet Gallery

All Photos | Site Cam Gallery | Key words

Large Photos
Page: [1]

IDNameLocationDateSizeCameraThumb
5291 20200701BA_PaCable.jpg
Excess cable tied up with a ziptie on the PurpleAir sensor		 Bouldin Corn2020-07-01 12:55:34 1440x1920 iPhone SE (1st generation) Excess cable tied up with a ziptie on the PurpleAir sensor
5315 20200828MB_CableKnot.jpg
I tied a knot in the floating boom guywire cable to pull the boom up higher		 Mayberry2020-08-28 13:37:18 1440x1920 iPhone SE (1st generation) I tied a knot in the floating boom guywire cable to pull the boom up higher
5504 20210311HS_ScaffoldFeet.jpg
We moved a 2x12 plank from the edge of the platform to the middle so that we had more area to secure the scaffolding foot. The feet were drilled into the platforms and the scaffolding was tied down with a chain and turnbuckle attached to an eyebolt screwed into the platform (not pictured). The holes in the platform were later covered by chain link fencing.		 Hill Slough2021-03-11 12:37:06 1920x1440 iPhone SE (2nd generation) We moved a 2x12 plank from the edge of the platform to the middle so that we had more area to secure the scaffolding foot. The feet were drilled into the platforms and the scaffolding was tied down with a chain and turnbuckle attached to an eyebolt screwed into the platform (not pictured). The holes in the platform were later covered by chain link fencing.
5761 20211105BA_HmpCompare.jpg
Three HMP155s set up on the BA tower for an HMP intercomparison for Carlos's the bouncer experiment. The calibration datalogger enclosure is zip-tied to the scaffolding to prevent water from pooling in the bottom of the enclosure. 		Bouldin Alfalfa2021-11-05 15:49:13 1920x1440 iPhone SE (1st generation) Three HMP155s set up on the BA tower for an HMP intercomparison for Carlos
Page: [1]