Biomet Gallery

View Details
Page: [1]

411 TZ_020.jpg (2010-10-07 18:47:34 ) Full size: 2592x1944
Siyan checking the calibration gas tanks at Tonzi

2923 TW_autocam_20120906_1115.jpg (2012-09-06 11:15:02 ) Full size: 1920x1440
LI7700 calibration

2928 WP_autocam_20120906_1215.jpg (2012-09-06 12:15:02 ) Full size: 1920x1440
Boom folded for LI7700 calibration

4025 TW_autocam_20140910_0945.jpg (2014-09-10 09:45:03 ) Full size: 1920x1440
Joe and Sara 7700 calibration

4013 WP_autocam_20140910_1115.jpg (2014-09-10 11:15:02 ) Full size: 1920x1440
7700 calibration

4657 20170323MB_zerocalgas.JPG (2017-03-23 14:32:37 ) Full size: 1080x1440
Zero air and calibration gas for calibration LI7700 in the field.

4655 20170323MB_7700hood.JPG (2017-03-23 14:32:40 ) Full size: 1080x1440
Calibration hood on LI7700

4869 20180601TZ_BlackPanelForFLIR.jpg (2018-06-01 16:59:16 ) Full size: 1920x1440
Black panel and IRT sensor for FLIR thermal camera calibration

5545 20210609HS_RadCalKit.jpg (2021-06-09 18:45:36 ) Full size: 1440x1920
Radiometer calibration kit installed on Hill Slough rad boom (4-way radiometer, Apogee NDVI pair, PAR). Note high winds blowing the loose cables sideways.

5550 20210624BC_7700Calibration.jpg (2021-06-24 11:44:22 ) Full size: 1920x1440
Calibrating 7700 off the tower, less wind don’t have to unload tanks.

5761 20211105BA_HmpCompare.jpg (2021-11-05 15:49:13 ) Full size: 1920x1440
Three HMP155s set up on the BA tower for an HMP intercomparison for Carlos's the bouncer experiment. The calibration datalogger enclosure is zip-tied to the scaffolding to prevent water from pooling in the bottom of the enclosure.

6146 gilberttract_2022_06_09_081405.jpg (2022-06-09 09:15:22 ) Full size: 1296x960
7700 calibration in progress

6552 gilberttract_2023_08_08_094405.jpg (2023-08-08 17:47:56 ) Full size: 1296x960
Robert stealing the LI7700 (to swap it for calibration)

Page: [1]