| Date: |
2020-12-11 |
| From: |
Lab - none |
| To: |
Lab - none |
| Title: |
Tested |
| Notes: |
Tested in the lab with both Campbell interface and homemade interface sn 547-01. In either case, the temperature read high, around 40 degC when it should've been around 20-25 degC. I unwrapped an old splice in the cable, but it looked perfectly fine, so I think the temperature sensor is just bad. We can still use this sensor in the future, but we'll need to be careful to do the temperature correction with another temperature sensor in the water (e.g., from water level sensor or a water thermocouple). |
| Entered by: |
Daphne Szutu |
|
|
