| Date: |
2022-08-29 |
| From: |
Lab - none |
| To: |
Factory - none |
| Title: |
Shipped |
| Notes: |
Shipped back to StarDot for inspection/repair. The green LED in front comes on when the camera is plugged into power, but there is no network activity no matter how I try to physically connect it (through a router, through a switch, directly through a computer; with every combination of laptop ethernet port IP address/subnet). The only exception is if I connect it directly to a laptop with a crossover cable--the camera ethernet port does have a green light blinks every 3 seconds, but there are no changes to the green light (i.e., no network activity) even when I start StarDot Tools. It seemed to boot fine after a hard reset, but there was still no network activity. This camera was set to the default 192.168.2.101 IP address and connected fine in the lab in the past. The camera stopped working after bringing it back from Elkhorn Slough field trip in mid July. |
| Entered by: |
Daphne Szutu |
|
|
