| Date: |
2021-04-29 |
| From: |
Lab - none |
| To: |
Lab - none |
| Title: |
Tested |
| Notes: |
I couldn't get this sensor to work in the field. Seem to test okay on a CR1000 terminal using the SDI-12 pass through. Will try again in the field again next time. It's using address 0 (zero): 0I! - id, 0M! - Measure, 0D0! - Data. Note CRBasic program automatically issues 0D0! command after 0M! command. |
| Entered by: |
Joe Verfaillie |
|
|
