Equipment and Calibration History
View Equipment |
| Date: |
2021-04-29 |
| From: |
Lab - none |
| To: |
Lab - none |
| Title: |
Repair |
| Notes: |
A few weeks ago I spliced a new wire on to the circular connector at the end of the cable where a cow chewed it off. I tried to install it in the field on 2021-04-01 and thought I was missing a resistor. On 2021-04-18 I was sure that it did not need a resistor but it still didn't work. I tested the sensor on another cable in the field and it was fine so my splice must be bad. Today I found the the black wire was not spliced well. I fixed the splice and the senor tested okay in the lab. |
| Entered by: |
Joe Verfaillie |
|
|
