Equipment and Calibration History
View Equipment |
| Date: |
2020-07-23 |
| From: |
Lab - none |
| To: |
Lab - none |
| Title: |
Tested |
| Notes: |
Tested in the lab. I used a cable in the lab to power the sensor and measure its temperature signal with a volt meter. The reading was wrong and the base of the sensor definitely got warm. I same cable with another HMP60 and got a much more reasonable temperature reading and did not notice the sensor getting warm. The sensor needs to go back to Campbell for evaluation. |
| Entered by: |
Joe Verfaillie |
|
|
