| Date: |
2017-02-17 |
| From: |
Lab - none |
| To: |
Lab - none |
| Title: |
Upgrade |
| Notes: |
Upgraded firmware to correct for W bug. The upgrade failed the first time because the Power-on message had been turned off. Without the Power-on message, the upgrade wizard cannot check if the checksums are correct. After I turned on the Power-on message, I used the second upgrade (X074417-s.gcu) file to complete the upgrade.
Old SN: Y074417
New SN: X074417
Upgrade file: Y074417-Y124215-m.gcu, X074417-s.gcu
Old firmware: 2329-114-01
New firmware: 2329-116-01
All Checksum fields report PASS.
Log file: WMUpgradeLog_X074417_170217_121544.txt
Config file below. If there are two entries in a field, the first entry is the old setting and the second entry is the new setting.
-------
THE FOLLOWING FIELDS HAVE CHANGED
Output rate : P2 2 Hz
Output rate : P8 20 Hz
THE NEW CONFIGURATION IN FULL
====DETAILS OF DETECTED ANEMOMETER========================
Serial Number : X074417
----SW VERSION--------------------------------------------
Anemometer Firmware Version: 2329-116
----HW DETAILS OF ANEMOMETER------------------------------
Detected Anemometer Class : WindMaster 20Mhz
Number of AXIS on this unit : 3
ADC resolution of attached unit : 14
DAC resolution of attached unit : 14
Number of ADC channels : 4
Number of DAC channels : 4
Maximum sampling rate : (8) P8 20 Hz
----USER CONFIGURATION OF ANEMOMETER----------------------
Baud Rate : 19200
Output Message Format : M1 UV(W)
Output Message Velocity Units : m/s
Output Message Terminator :
Retries : ON
Instantaneous Sampling : OFF
Factory Calibration : ON
Physical Communications : Auto
Resolution settings : High resolution
Alignment settings : North to spar
Averaging settings : Averaging inactive
Output rate : P2 2 Hz
Output rate : P8 20 Hz
Polar angle minimum magnitude: 0.050 m/s
Power-On Message : Display Power On Message
ASCII Format : Fixed Field
SOS and Sonic Temperature display : SOS
Analogue input display : OFF
Analogue output mode : -5V to 5V
Unit Identifier : 'Q'
Output Channel 1 : U output (full range = 30m/s)
Output Channel 2 : V output (full range = 30m/s)
Output Channel 3 : W output (full range = 5m/s)
Output Channel 4 : Speed of Sound
|
| Entered by: |
Daphne Szutu |
|
|
