Equipment and Calibration History
View Equipment |
| Date: |
2013-07-23 |
| From: |
Lab - none |
| To: |
Disposed - |
| Title: |
Tested |
| Notes: |
I (Sara Knox) tested the probe in the lab to try to figure out what was wrong with it. It still maxed out at 5000 mV and the lights on the circuit board were flashing red and green. I took it out of the teflon tubing to inspect the probe for water damage - sure enough it was all corroded. I think its dead Jim. |
| Entered by: |
|
|
|
