Equipment and Calibration
Equipment history at Hill Slough| ALL | | Anemometer || Battery Bank || Camera || CO2 Probe || Conductivity Sensor || Data Logger || DO Sensor || Fluorometer || Forced Diffusion || Gas Analyzer || Heat Flux Plate || Interface || Multiplexer || Narrow Band || Net Radiometer || PAR Sensor || pH ORP || Precipitation || Range Finder || RH & Temp || Soil Moisture Probe || Solar Controller || Solar Panel || Water Level || Wiper |
SELECT a.recno, a.eh_date, a.eh_loc1, a.eh_loc2, IF(a.eh_loc2=:loc, a.eh_locref2, a.eh_locref1) AS ref, a.eh_locref2, a.eh_title, a.eh_notes, a.eh_id, b.serialno, b.equip, b.modelno FROM equiphist a INNER JOIN equiplist b ON a.eh_id=b.recno WHERE (a.eh_loc1=:loc1 OR a.eh_loc2=:loc2) AND b.equip=:eq ORDER BY b.serialno, a.eh_date
| Date | Serial No. | Model | Action | Ref | Notes |
|---|---|---|---|---|---|
| pH ORP | |||||
| 2022-07-13 | 22D102641 | EXO pH-ORP | Installed | pH-ORP Channel | Installed as part of the EXO2 sonde at HS in the channel off of the boardwalk, about 30m east of the tower. |
| 2022-09-16 | 22D102641 | EXO pH-ORP | Removed | pH-ORP Channel | Removed as part of the EXO2 channel deployed in the channel at HS. Brought back to the lab for cleaning and calibration. |
| 2022-09-29 | 22D102641 | EXO pH-ORP | Installed | pH-ORP Channel | Installed as part of the EXO2 sonde in the channel at Hill Slough. |
| 2023-01-03 | 22D102641 | EXO pH-ORP | Removed | pH-ORP | Removed from Hill Slough channel and brought back to the lab for calibration. |
| 2023-01-06 | 22D102641 | EXO pH-ORP | Installed | pH-ORP | Installed in the channel at Hill Slough (same height as before) after calibrating in the lab yesterday. |
| 2023-04-25 | 22D102641 | EXO pH-ORP | Removed | pH-ORP | Removed from HS channel for routine calibration |
| 2023-06-14 | 22D102641 | EXO pH-ORP | Installed | pH-ORP | Installed new tip on pH/ORP probe |
| 2023-08-24 | 22D102641 | EXO pH-ORP | Installed | pH-ORP | Reinstalled after quarterly cleaning and calibration |
| 2023-10-11 | 22D102641 | EXO pH-ORP | Removed | pH-ORP | Removed for inspection in the lab because turbidy/fDOM/ph/ORP look weird |
| 2023-10-18 | 22D102641 | EXO pH-ORP | Installed | pH-ORP | Installed in the Hill Slough channel after calibration in the lab. The whole sonde was raised about 20cm to keep it out of the mud. |
| 2024-01-18 | 22D102641 | EXO pH-ORP | Removed | pH-ORP | Removed from HS channel and brought back to the lab for routine calibration |
| 2024-01-25 | 22D102641 | EXO pH-ORP | Installed | pH-ORP | Installed in the Hill Slough channel after calibration |
| 2024-04-04 | 22D102641 | EXO pH-ORP | Removed | pH-ORP | Removed from the Hill Slough channel and brought back to the lab for calibration (and to install the new auto wiper that arrived) |
| 2024-04-10 | 22D102641 | EXO pH-ORP | Installed | pH-ORP | Reinstalled at the HS channel after regular lab cleaning and calibration |
| 2024-07-16 | 22D102641 | EXO pH-ORP | Removed | pH-ORP | Removed from the HS channel and brought back to the lab for routine calibration |
| 2024-07-23 | 22D102641 | EXO pH-ORP | Installed | pH-ORP | Installed in the Hill Slough channel after calibration. Sonde is in the air during low tide. |
| 2024-09-11 | 22D102641 | EXO pH-ORP | Removed | pH-ORP | Removed from the HS channel EXO because it is in the air for several hours every day. This probe should remain inundated (or at least humid) for ideal electrolyte longevity. |