Equipment and Calibration

Equipment history at Bouldin Corn

| ALL | | Air Quality Sensor || Anemometer || Barometer || Camera || Data Logger || Forced Diffusion || Gas Analyzer || Heat Flux Plate || Infrared Temperature || Interface || Multiplexer || Narrow Band || Net Radiometer || PAR Sensor || Precipitation || Range Finder || RH & Temp || Soil Moisture Probe || Solar Controller || Water Level || Weather Station |

SELECT a.recno, a.eh_date, a.eh_loc1, a.eh_loc2, IF(a.eh_loc2=:loc, a.eh_locref2, a.eh_locref1) AS ref, a.eh_locref2, a.eh_title, a.eh_notes, a.eh_id, b.serialno, b.equip, b.modelno FROM equiphist a INNER JOIN equiplist b ON a.eh_id=b.recno WHERE (a.eh_loc1=:loc1 OR a.eh_loc2=:loc2) AND b.equip=:eq ORDER BY b.serialno, a.eh_date

Date Serial No. Model Action Ref Notes
Soil Moisture Probe
2017-04-26 17128 CS655 Installed Multiplexer Thermocouple Installed at the Bouldin Corn site with the initial set up of the tower. Temporarily at the south edge of the scaffolding until tractor work is finished.
2019-12-02 17128 CS655 Removed Soil Moisture Probe B Removed from Bouldin Corn site and brought back to the lab after the tower fell down during a rain/wind storm on 2019-11-26.
2019-12-13 17128 CS655 Installed Soil Moisture Probe B Re-installed at Bouldin Corn after re-assembling tower. Need to check if this in A/B/C location.
2020-05-19 17128 CS655 Moved Soil Moisture Probe B Moved back into the field from being under the scaffolding at the side of the field for tilling and planting.
2020-09-01 17128 CS655 Moved Soil Moisture Probe B Moved tower and soil sensors back from field in preparation for corn harvest. Soil sensors were reinstalled under the tower at -2cm depth.
2022-03-31 17128 CS655 Moved Soil Moisture Probe B Moved from the field back under the tower in anticipation of tilling. This sensor is to the south at 15cm depth.
2022-05-27 17128 CS655 Moved Soil Moisture Probe B Moved from under the tower in to the field after planting southwest of the tower. The tower was moved about 2m west to the edge of the field
2023-04-26 17128 CS655 Moved Soil Moisture Probe B Moved from field to tower in preparation for impending plowing. Not installed in soil yet.
2023-05-03 17128 CS655 Installed Soil Moisture Probe B Installed in soil under tower. Probe was installed horizontally with top of probe 5cm under soil surface.
2017-04-26 17129 CS655 Installed Soil Moisture Probe A Installed at the Bouldin Corn site with the initial set up of the tower. Temporarily at the south edge of the scaffolding until tractor work is finished.
2019-12-02 17129 CS655 Removed Soil Moisture Probe A Removed from Bouldin Corn site and brought back to the lab after the tower fell down during a rain/wind storm on 2019-11-26.
2019-12-13 17129 CS655 Installed Soil Moisture Probe A Re-installed at Bouldin Corn after re-assembling tower. Need to check if this in A/B/C location.
2020-05-19 17129 CS655 Moved Soil Moisture Probe A Moved back into the field from being under the scaffolding at the side of the field for tilling and planting.
2020-09-01 17129 CS655 Moved Soil Moisture Probe A Moved tower and soil sensors back from field in preparation for corn harvest. Soil sensors were reinstalled under the tower at -2cm depth.
2022-03-31 17129 CS655 Moved Soil Moisture Probe A Moved from the field back under the tower in anticipation of tilling. This sensor is to the north at 10cm depth.
2022-05-27 17129 CS655 Moved Soil Moisture Probe A Moved from under the tower in to the field after planting northwest of the tower. The tower was moved about 2m west to the edge of the field
2023-04-26 17129 CS655 Moved Soil Moisture Probe A Moved from field to tower in preparation for impending plowing. Not installed in soil yet.
2023-05-03 17129 CS655 Installed Soil Moisture Probe A Installed in soil under tower. Probe was installed horizontally with top of probe 5cm under soil surface.
2017-04-26 17133 CS655 Installed Soil Moisture Probe C Installed at the Bouldin Corn site with the initial set up of the tower. Temporarily at the south edge of the scaffolding until tractor work is finished.
2019-12-02 17133 CS655 Removed Soil Moisture Probe C Removed from Bouldin Corn site and brought back to the lab after the tower fell down during a rain/wind storm on 2019-11-26.
2019-12-13 17133 CS655 Installed Soil Moisture Probe C Re-installed at Bouldin Corn after re-assembling tower. Need to check if this in A/B/C location.
2020-05-19 17133 CS655 Moved Soil Moisture Probe C Moved back into the field from being under the scaffolding at the side of the field for tilling and planting.
2020-09-01 17133 CS655 Moved Soil Moisture Probe C Moved tower and soil sensors back from field in preparation for corn harvest. Soil sensors were reinstalled under the tower at -2cm depth.
2022-03-31 17133 CS655 Moved Soil Moisture Probe C Moved from the field back under the tower in anticipation of tilling. This sensor is horizontally between the other 2 Campbell sensors at 20cm depth.
2022-05-27 17133 CS655 Moved Soil Moisture Probe C Moved from under the tower in to the field after planting west of the tower. The tower was moved about 2m west to the edge of the field
2023-04-26 17133 CS655 Moved Soil Moisture Probe C Moved from field to tower in preparation for impending plowing. Not installed in soil yet.
2023-05-03 17133 CS655 Installed Soil Moisture Probe C Installed in soil under tower. Probe was installed horizontally with top of probe 5cm under soil surface.
2017-04-26 M003370 ML3 Installed Soil Moisture Probe Theta Installed at the Bouldin Corn site with the initial set up of the tower. Temporarily at the south edge of the scaffolding until tractor work is finished.
2019-12-02 M003370 ML3 Removed Soil Moisture Probe Theta Removed from Bouldin Corn site and brought back to the lab after the tower fell down during a rain/wind storm on 2019-11-26.
2019-12-13 M003370 ML3 Installed Soil Moisture Probe Theta Re-installed at Bouldin Corn after re-assembling tower.
2020-05-19 M003370 ML3 Moved Soil Moisture Probe Theta Moved back into the field from being under the scaffolding at the side of the field for tilling and planting.
2020-09-01 M003370 ML3 Moved Soil Moisture Probe Theta Moved tower and soil sensors back from field in preparation for corn harvest. The theta probe was reinstalled vertically under the tower.
2022-03-31 M003370 ML3 Moved Soil Moisture Probe Theta Moved from the field back under the tower in anticipation of tilling. This sensor is buried just under the surface.
Export to BADM