Equipment and Calibration
Equipment history at Bouldin Corn| ALL | | Air Quality Sensor || Anemometer || Barometer || Camera || Data Logger || Forced Diffusion || Gas Analyzer || Heat Flux Plate || Infrared Temperature || Interface || Multiplexer || Narrow Band || Net Radiometer || PAR Sensor || Precipitation || Range Finder || RH & Temp || Soil Moisture Probe || Solar Controller || Water Level || Weather Station |
SELECT a.recno, a.eh_date, a.eh_loc1, a.eh_loc2, IF(a.eh_loc2=:loc, a.eh_locref2, a.eh_locref1) AS ref, a.eh_locref2, a.eh_title, a.eh_notes, a.eh_id, b.serialno, b.equip, b.modelno FROM equiphist a INNER JOIN equiplist b ON a.eh_id=b.recno WHERE (a.eh_loc1=:loc1 OR a.eh_loc2=:loc2) AND b.equip=:eq ORDER BY b.serialno, a.eh_date
| Date | Serial No. | Model | Action | Ref | Notes |
|---|---|---|---|---|---|
| RH & Temp | |||||
| 2023-04-11 | E3514 | HygroVUE10 | Installed | RH & Temp | Installed at BC tower at the same height/location to replace RH/T sensor HMP60 sn L1740398. |
| 2017-04-26 | L1740395 | HMP60 | Installed | RH & Temp | Installed on the 7500 post at the Bouldin Corn site with the initial set up of the tower. |
| 2019-12-02 | L1740395 | HMP60 | Removed | RH & Temp | Removed from Bouldin Corn site and brought back to the lab after the tower fell down during a rain/wind storm on 2019-11-26. |
| 2019-12-13 | L1740395 | HMP60 | Installed | RH & Temp | Re-installed at Bouldin Corn after re-assembling tower. |
| 2020-07-21 | L1740395 | HMP60 | Removed | RH & Temp | Removed from BC and brought back to the lab for inspection. AirT/RH both went bad on 7/5 but nothing obviously wrong with it. |
| 2020-07-30 | L1740398 | HMP60 | Installed | RH & Temp | Installed at BC to replace sn L1740395, which was sent to Campbell for repair |
| 2023-04-03 | L1740398 | HMP60 | Removed | RH & Temp | Removed from the BC tower and brought back to the lab for testing b/c the sensor was not giving any data |