Equipment and Calibration
Equipment history at Hill Slough| ALL | | Anemometer || Battery Bank || Camera || CO2 Probe || Conductivity Sensor || Data Logger || DO Sensor || Fluorometer || Forced Diffusion || Gas Analyzer || Heat Flux Plate || Interface || Multiplexer || Narrow Band || Net Radiometer || PAR Sensor || pH ORP || Precipitation || Range Finder || RH & Temp || Soil Moisture Probe || Solar Controller || Solar Panel || Water Level || Wiper |
SELECT a.recno, a.eh_date, a.eh_loc1, a.eh_loc2, IF(a.eh_loc2=:loc, a.eh_locref2, a.eh_locref1) AS ref, a.eh_locref2, a.eh_title, a.eh_notes, a.eh_id, b.serialno, b.equip, b.modelno FROM equiphist a INNER JOIN equiplist b ON a.eh_id=b.recno WHERE (a.eh_loc1=:loc1 OR a.eh_loc2=:loc2) AND b.equip=:eq ORDER BY b.serialno, a.eh_date
| Date | Serial No. | Model | Action | Ref | Notes |
|---|---|---|---|---|---|
| PAR Sensor | |||||
| 2021-03-11 | 050596 | PAR-LITE | Installed | PAR Sensor Reflected | Installed at Hill Slough with site setup in reflected position |
| 2021-03-11 | 050597 | PAR-LITE | Installed | PAR Sensor Incoming | Installed at Hill Slough with site setup in incoming position |
| 2021-04-27 | Q100420 | LI-190/R | Installed | PAR Sensor Diffuse | Installed at HS as part of the rotating shadow band diffuse PAR setup. This senor has a Licor supplied 604 Ohm resistor to convert from uA to mV. |
| 2021-08-25 | Q100420 | LI-190/R | Removed | PAR Sensor Diffuse | Removed from Hill Slough dfPAR and brought back to the lab for testing because it was mostly NAN or 0 with some sporadic data. It was replaced by sn Q100421. |
| 2021-08-25 | Q100421 | LI-190/R | Installed | PAR Sensor Diffuse | Installed at Hill Slough as part of the rotating shadow band for dfPAR. It replaced sn Q100420. |