Equipment and Calibration
Equipment history at East Pond| ALL | | Anemometer || Barometer || Battery Bank || Camera || CO2 Probe || Conductivity Sensor || Data Logger || DO Sensor || Gas Analyzer || Heat Flux Plate || Interface || Multiplexer || Narrow Band || Net Radiometer || PAR Sensor || RH & Temp || Soil Moisture Probe || Solar Controller || Solar Panel || Water Level |
SELECT a.recno, a.eh_date, a.eh_loc1, a.eh_loc2, IF(a.eh_loc2=:loc, a.eh_locref2, a.eh_locref1) AS ref, a.eh_locref2, a.eh_title, a.eh_notes, a.eh_id, b.serialno, b.equip, b.modelno FROM equiphist a INNER JOIN equiplist b ON a.eh_id=b.recno WHERE (a.eh_loc1=:loc1 OR a.eh_loc2=:loc2) AND b.equip=:eq ORDER BY b.serialno, a.eh_date
| Date | Serial No. | Model | Action | Ref | Notes |
|---|---|---|---|---|---|
| Multiplexer | |||||
| 2018-06-13 | 1164 | AM16/32A | Installed | Multiplexer Met | Installed at East Pond to replace one with worn out channels. This one came off the decommissioned TA site. |
| 2020-01-30 | 1164 | AM16/32A | Moved | Multiplexer Met | Removed with the decommissioning of the EP tower and installed at the new SW Temporary site 1250m upwind of the Permanent Tower. |
| 2018-04-17 | 1429 | AM16/32A | Installed | Multiplexer Met | Installed at EP tower as part of initial site set up. |
| 2018-05-03 | 1429 | AM16/32A | Notes | Multiplexer Met | This mux also has spikes/drops in some channels, so starting to move sensors around to avoid spikes. |
| 2018-06-13 | 1429 | AM16/32A | Removed | Multiplexer Met | Removed from East Pond due to spikes on worn out channels |
| 2018-04-17 | 2856 | AM25T | Installed | Multiplexer Thermocouple | Installed at EP tower as part of initial site set up. |
| 2020-01-30 | 2856 | AM25T | Moved | Multiplexer Thermocouple | Removed with the decommissioning of the EP tower and installed at the new SW Temporary site 1250m upwind of the Permanent Tower. |