Equipment and Calibration
Equipment history at Vaira| ALL | | Anemometer || Battery Bank || Camera || CO2 Probe || Data Logger || Forced Diffusion || Gas Analyzer || Heat Flux Plate || Interface || LED sensor || Moisture Point || Multiplexer || Narrow Band || Net Radiometer || PAR Sensor || Precipitation || Pyranometer || Radio || RH & Temp || Soil Moisture Probe || Solar Controller || Solar Panel || Weather Station |
SELECT a.recno, a.eh_date, a.eh_loc1, a.eh_loc2, IF(a.eh_loc2=:loc, a.eh_locref2, a.eh_locref1) AS ref, a.eh_locref2, a.eh_title, a.eh_notes, a.eh_id, b.serialno, b.equip, b.modelno FROM equiphist a INNER JOIN equiplist b ON a.eh_id=b.recno WHERE (a.eh_loc1=:loc1 OR a.eh_loc2=:loc2) AND b.equip=:eq ORDER BY b.serialno, a.eh_date
| Date | Serial No. | Model | Action | Ref | Notes |
|---|---|---|---|---|---|
| Moisture Point | |||||
| 2001-11-10 | 000000573FAA | PRB-K Type #8 | Installed | Moisture Point Solar | Installed at Vaira near the solar panels by Dennis and Liukang |
| 2010-06-24 | 000000573FAA | PRB-K Type #8 | Removed | Moisture Point Solar | Removed from Vaira between the solar panels and the diffuse radiation tripod. The top pin in the connector is broken. |
| 2010-12-09 | 00000128B7B90 | PRB-K Type #8 | Installed | Moisture Point Gate | This probe was intalled at Vaira inside the cow fense to the right of the gate and fence charger. |
| 2019-03-29 | 00000128B7B90 | PRB-K Type #8 | Removed | Moisture Point Gate | Removed from the location near the gate. This probe has two broken pins top and bottom and is no longer making readings. |
| 2010-11-12 | 00000128B8072 | PRB-K Type #8 | Removed | Moisture Point Gate | The bottom measurement location was not working so it was removed and brough back to the lab for testing/repair. The pilot rod was left in the hole. |
| 2010-11-12 | 00000128B8072 | PRB-K Type #8 | Installed | Moisture Point Gate | Installed inside the cow fence at Vaira near the gate on the south side of the enclosure. |
| 2010-11-12 | 00000128B97F3 | PRB-K Type #8 | Installed | Moisture Point Gate | Installed inside the cow fence at Vaira on the east side of the enclosure where a broken probes was previously removed. |
| 2022-03-24 | 00000128B97F3 | PRB-K Type #8 | Removed | Moisture Point Solar | Removed from near the solar panels, top and bottom pin broken. Not working for many months |
| 2010-11-12 | 00000128BDDE8 | PRB-K Type #8 | Installed | Moisture Point Biomass | Installed in the west corner of Bill Frost's biomass sampling enclosure at Vaira. |
| 2022-03-24 | 00000128BDDE8 | PRB-K Type #8 | Removed | Moisture Point Biomass | Removed from the At biomass fence, one pin broken. Not working for many months |
| 2001-11-10 | 000007933FDE | PRB-K Type #8 | Installed | Moisture Point Tower | Installed at Vaira near the eddy tower by Dennis and Liukang |
| 2022-03-24 | 000007933FDE | PRB-K Type #8 | Removed | Moisture Point Tower | Removed from near the eddy tower, top and bottom pin broken. Not working for many months |