Equipment and Calibration
Equipment history at Sherman Island| ALL | | Anemometer || Barometer || CO2 Probe || CO2 Transmitter || Data Logger || Gas Analyzer || Heat Flux Plate || Interface || LED sensor || Moisture Point || Multiplexer || Net Radiometer || PAR Sensor || Precipitation || Pump || RH & Temp || Scroll Pump || Soil Moisture Probe || Solar Controller || Water Level |
SELECT a.recno, a.eh_date, a.eh_loc1, a.eh_loc2, IF(a.eh_loc2=:loc, a.eh_locref2, a.eh_locref1) AS ref, a.eh_locref2, a.eh_title, a.eh_notes, a.eh_id, b.serialno, b.equip, b.modelno FROM equiphist a INNER JOIN equiplist b ON a.eh_id=b.recno WHERE (a.eh_loc1=:loc1 OR a.eh_loc2=:loc2) AND b.equip=:eq ORDER BY b.serialno, a.eh_date
| Date | Serial No. | Model | Action | Ref | Notes |
|---|---|---|---|---|---|
| Moisture Point | |||||
| 2010-06-22 | 000000A6D8356 | PRB-K Type #8 | Removed | This probe was removed from the Sherman Island cow pasture. It was outside the cow fence giving bad readings. Second pin from the top is broken. | |
| 2011-03-22 | 00000128B8072 | PRB-K Type #8 | Installed | Installed on the north side of the area inclosed by the cow fence near the soil CO2 probes. | |
| 2015-03-24 | 00000128B8072 | PRB-K Type #8 | Removed | Removed from the North location for use at Tonzi and in preparation of decommissioning of the Sherman site. | |
| 2013-09-18 | 00000AB5408F | PRB-K Type #8 | Removed | Removed from the west location at Sherman because it wasn't working. The bottom-most pin is broken. | |
| 2010-06-24 | 00000FED7C67 | PR K Type 8 | Removed | This probe was removed from the Sherman Island cow pasture. It was giving bad readings. | |
| 2010-06-22 | 00000FED8688 | PR K Type 8 | Removed | Removed from the Sherman Island cow pasture. This probe was outside the cow fence and giving bad readings. | |
| 2015-03-24 | 00000FEDDAA1 | PRB-K Type #8 | Removed | Removed from the East location for use at Tonzi and in preparation of decommissioning of the Sherman site. | |