Equipment and Calibration

Equipment history at Gilbert Tract

| ALL | | Anemometer || Barometer || Battery Bank || Camera || CH4 Probe || CO2 Probe || Conductivity Sensor || Data Logger || DO Sensor || Flowmeter || Fluorometer || Gas Analyzer || Heat Flux Plate || Infrared Temperature || Interface || Multiplexer || Narrow Band || Net Radiometer || PAR Sensor || pH ORP || Precipitation || Range Finder || RH & Temp || Solar Controller || Solar Panel || Water Level || Weather Station || Wiper |

SELECT a.recno, a.eh_date, a.eh_loc1, a.eh_loc2, IF(a.eh_loc2=:loc, a.eh_locref2, a.eh_locref1) AS ref, a.eh_locref2, a.eh_title, a.eh_notes, a.eh_id, b.serialno, b.equip, b.modelno FROM equiphist a INNER JOIN equiplist b ON a.eh_id=b.recno WHERE (a.eh_loc1=:loc1 OR a.eh_loc2=:loc2) AND b.equip=:eq ORDER BY b.serialno, a.eh_date

Date Serial No. Model Action Ref Notes
Interface
2021-09-02 13054 NL115 Moved Interface NL115 Moved from SW to GT with the decomissioning of SW and the beginning of GT
2024-08-16 23H107001 EXO3S Installed EXO Installed in Gilbert Tract channel, co-located with the ADCP and channel miniDOT
2024-10-17 23H107001 EXO3S Removed EXO Removed from GT channel and brought back to the lab for calibration
2024-10-23 23H107001 EXO3S Installed EXO Installed in the GT channel
2023-01-25 ADINAEXO1 EXO2 Removed none USGS removed this EXO from the Gilbert Tract channel and stashed it on the bank. Joe retrieved it from the site at the end of the day and brought it back to the lab.
2023-01-03 AIU-1039 LI-7550 Installed Interface LI-7550 Installed at Gilbert Tract to replace sn AIU-1569, which had some corrosion inside and was acting funny.
2023-05-17 AIU-1039 LI-7550 Removed Interface LI-7550 This AMP 7550 was removed from GT tower and replaced with out 7550 sn AIU-1866 which is back from the factory.
2021-09-02 AIU-1569 LI-7550 Moved Gas Analyzer CO2/H2O Moved from SW to GT with the decomissioning of SW and the beginning of GT
2023-01-03 AIU-1569 LI-7550 Removed Interface LI-7550 Removed from Gilbert Tract because it was acting funny (took a long time to eject/mount USB, consistent 7700 time sync error) and there was some corrosion inside from being left open last month. it was replaced with AMP box AIU-1039.
2023-10-27 AIU-1569 LI-7550 Installed Interface LI-7550 Installed with wood screws to 2x4 to replace the broken box removed yesterday
2023-05-17 AIU-1866 LI-7550 Installed Interface LI-7550 Installed at GT after factory repair to replace sn AIU-1039, the AMP 7550.
2023-10-26 AIU-1866 LI-7550 Removed Interface LI-7550 Removed because of a blown fuse. We tried replacing the fuse, but it blew immediately.
Export to BADM