Equipment and Calibration

Equipment history at East End

| ALL | | Anemometer || Barometer || Battery Bank || Camera || CO2 Probe || Conductivity Sensor || Data Logger || DO Sensor || Gas Analyzer || Heat Flux Plate || Interface || Multiplexer || Narrow Band || Net Radiometer || PAR Sensor || Precipitation || RH & Temp || Solar Controller || Solar Panel || Spectrometer || Water Level |

SELECT a.recno, a.eh_date, a.eh_loc1, a.eh_loc2, IF(a.eh_loc2=:loc, a.eh_locref2, a.eh_locref1) AS ref, a.eh_locref2, a.eh_title, a.eh_notes, a.eh_id, b.serialno, b.equip, b.modelno FROM equiphist a INNER JOIN equiplist b ON a.eh_id=b.recno WHERE (a.eh_loc1=:loc1 OR a.eh_loc2=:loc2) AND b.equip=:eq ORDER BY b.serialno, a.eh_date

Date Serial No. Model Action Ref Notes
Interface
2014-06-12 3585 A547 Installed Interface A547 Installed on the Eat End tower with conductivity probe sn 6494
2017-09-13 3585 A547 Removed Interface A547 Removed from EE for testing in the lab because the values were flat.
2019-12-17 3585 A547 Installed Interface A547 Reinstalled at East End after being removed after getting wet ans possibly causing a short circuit. Tested fine in the lab.
2013-11-25 6763 NL115 Moved Interface NL115 Eddy The DWR Corn / Construction tower was decommissioned and rechristened at its new permanent location at the Twitchell East End Wetland
2015-01-05 6763 NL115 Removed Interface NL115 Eddy Removed from the site due to the tower falling over in the wind on 2014-12-30. Likely undamaged.
2015-01-20 6763 NL115 Installed Interface NL115 Eddy Reinstalled after being removed when the scaffolding fell over.
2015-08-19 6763 NL115 Removed Interface NL115 Eddy Removed from the East End tower after becoming obsolete when the Licor flux system was installed.
2015-07-20 AIU-0397 LI-7550 Installed Interface LI-7550 Installed on the East End Tower to upgrade the eddy system - replacing older equipment
2016-04-13 AIU-0397 LI-7550 Upgrade Interface LI-7550 Updated the 7550 firmware from v7.3.0 to v8.0.0 skiping version 7.5.0 Relevant 7.5.0 changes: Main Window is now resizable, Added serial number entry for sonics, Help update, Fixed timeout when saving config files Relevant 8.0.0 changes: Separate bandwidth settings for analog inputs and gas channels, Detection of new RS instruments, Additional calibration coefficients, Added sonic software version entry, Added chopper temp logging.
2017-12-18 AIU-0397 LI-7550 Upgrade Interface LI-7550 The embedded software was upgraded from v8.0.0 to v8.5.0
2021-04-15 AIU-0397 LI-7550 Upgrade Interface LI-7550 Upgraded firmware from v8.5.0 to v8.8.32
Export to BADM