Equipment and Calibration
Equipment history at Sherman Island| ALL | | Anemometer || Barometer || CO2 Probe || CO2 Transmitter || Data Logger || Gas Analyzer || Heat Flux Plate || Interface || LED sensor || Moisture Point || Multiplexer || Net Radiometer || PAR Sensor || Precipitation || Pump || RH & Temp || Scroll Pump || Soil Moisture Probe || Solar Controller || Water Level |
SELECT a.recno, a.eh_date, a.eh_loc1, a.eh_loc2, IF(a.eh_loc2=:loc, a.eh_locref2, a.eh_locref1) AS ref, a.eh_locref2, a.eh_title, a.eh_notes, a.eh_id, b.serialno, b.equip, b.modelno FROM equiphist a INNER JOIN equiplist b ON a.eh_id=b.recno WHERE (a.eh_loc1=:loc1 OR a.eh_loc2=:loc2) AND b.equip=:eq ORDER BY b.serialno, a.eh_date
| Date | Serial No. | Model | Action | Ref | Notes |
|---|---|---|---|---|---|
| Heat Flux Plate | |||||
| 2015-05-12 | 000137 | HFP01 | Removed | Heat Flux Plate B | Removed with the decommissioning of the Sherman Cow Pasture site. |
| 2007-06-13 | 000142 | HFP01 | Removed | Heat Flux Plate C | Removed from Sherman Island HFP C, replaced by sn 00245 |
| 2012-11-15 | 001604 | HFP01 | Installed | Heat Flux Plate A | Reinstalled after calibration by Sebastian in BC. The original calibration factor was found to be stable. The plate was reinstalled at 2 cm depth maybe 4 meters to the west of the tower as far as the cable would allow. |
| 2015-05-12 | 001604 | HFP01 | Removed | Heat Flux Plate A | Removed with the decommissioning of the Sherman Cow Pasture site. |
| 2007-06-13 | 00245 | HFP01SC | Installed | Heat Flux Plate C | Installed at Sherman Island HFP C to replace sn 000142 |
| 2015-05-12 | 00245 | HFP01SC | Removed | Heat Flux Plate C | Removed with the decommissioning of the Sherman Cow Pasture site. The cable is all cracked and needs replacing. |