Equipment and Calibration

Equipment history at East End

| ALL | | Anemometer || Barometer || Battery Bank || Camera || CO2 Probe || Conductivity Sensor || Data Logger || DO Sensor || Gas Analyzer || Heat Flux Plate || Interface || Multiplexer || Narrow Band || Net Radiometer || PAR Sensor || Precipitation || RH & Temp || Solar Controller || Solar Panel || Spectrometer || Water Level |

SELECT a.recno, a.eh_date, a.eh_loc1, a.eh_loc2, IF(a.eh_loc2=:loc, a.eh_locref2, a.eh_locref1) AS ref, a.eh_locref2, a.eh_title, a.eh_notes, a.eh_id, b.serialno, b.equip, b.modelno FROM equiphist a INNER JOIN equiplist b ON a.eh_id=b.recno WHERE (a.eh_loc1=:loc1 OR a.eh_loc2=:loc2) AND b.equip=:eq ORDER BY b.serialno, a.eh_date

Date Serial No. Model Action Ref Notes
Heat Flux Plate
2018-01-31 001604 HFP01 Installed Heat Flux Plate A Installed at EE in open patch left of rad boom.
2013-11-25 00244 HFP01SC Installed Heat Flux Plate A Installed about 2cm below the surface to the west of the tower at the Twitchell East End Wetland site.
2015-01-05 00244 HFP01SC Removed Heat Flux Plate A Removed from the site due to the tower falling over in the wind on 2014-12-30. Likely undamaged.
2015-01-20 00244 HFP01SC Installed Heat Flux Plate A Reinstalled after being removed when the scaffolding fell over.
2018-01-31 00244 HFP01SC Removed Heat Flux Plate A Removed from EE because it started changing in steps around the end of October. Needs to be inspected and repaired. There are several nicks in the cable and the cable-head connection is loose.
2018-01-31 10822 HFP01 Installed Heat Flux Plate B Installed at EE to right of rad boom in vegetation.
2013-11-21 6499 HFP01 Installed Heat Flux Plate B Installed about 2cm below the surface to the west of the tower at the Twitchell East End Wetland site.
2015-01-05 6499 HFP01 Removed Heat Flux Plate B Removed from the site due to the tower falling over in the wind on 2014-12-30. Likely undamaged.
2015-01-20 6499 HFP01 Installed Heat Flux Plate B Reinstalled after being removed when the scaffolding fell over.
2015-05-21 6499 HFP01 Removed Heat Flux Plate B Removed from the East End tower due to intermittent bad values.
2013-11-25 6649 HFP01 Installed Heat Flux Plate C Installed about 2cm below the surface to the west of the tower at the Twitchell East End Wetland site.
2015-01-05 6649 HFP01 Removed Heat Flux Plate C Removed from the site due to the tower falling over in the wind on 2014-12-30. Likely undamaged.
2015-01-20 6649 HFP01 Installed Heat Flux Plate C Reinstalled after being removed when the scaffolding fell over.
2017-09-26 6649 HFP01 Lost Heat Flux Plate C Cable removed from EE because the cable had been chewed through. The sensor is still lost to the wetland.
Export to BADM