Equipment and Calibration
Equipment history at Bouldin Corn| ALL | | Air Quality Sensor || Anemometer || Barometer || Camera || Data Logger || Forced Diffusion || Gas Analyzer || Heat Flux Plate || Infrared Temperature || Interface || Multiplexer || Narrow Band || Net Radiometer || PAR Sensor || Precipitation || Range Finder || RH & Temp || Soil Moisture Probe || Solar Controller || Water Level || Weather Station |
SELECT a.recno, a.eh_date, a.eh_loc1, a.eh_loc2, IF(a.eh_loc2=:loc, a.eh_locref2, a.eh_locref1) AS ref, a.eh_locref2, a.eh_title, a.eh_notes, a.eh_id, b.serialno, b.equip, b.modelno FROM equiphist a INNER JOIN equiplist b ON a.eh_id=b.recno WHERE (a.eh_loc1=:loc1 OR a.eh_loc2=:loc2) AND b.equip=:eq ORDER BY b.serialno, a.eh_date
| Date | Serial No. | Model | Action | Ref | Notes |
|---|---|---|---|---|---|
| Heat Flux Plate | |||||
| 2017-04-26 | 10861 | HFP01 | Installed | Heat Flux Plate C | Installed at the Bouldin Corn site with the initial set up of the tower. Temporarily at the south edge of the scaffolding until tractor work is finished. |
| 2019-12-02 | 10861 | HFP01 | Removed | Heat Flux Plate C | Removed from Bouldin Corn site and brought back to the lab after the tower fell down during a rain/wind storm on 2019-11-26. |
| 2019-12-13 | 10861 | HFP01 | Installed | Heat Flux Plate C | Re-installed at Bouldin Corn after re-assembling tower. Need to check if this in A/B/C location. |
| 2020-05-19 | 10861 | HFP01 | Moved | Heat Flux Plate C | Moved back into the field from being under the scaffolding at the side of the field for tilling and planting. |
| 2020-09-01 | 10861 | HFP01 | Moved | Heat Flux Plate C | Moved tower and soil sensors back from field in preparation for corn harvest. Soil sensors were reinstalled under the tower at -2cm depth. |
| 2023-04-26 | 10861 | HFP01 | Moved | Heat Flux Plate C | Moved from field to tower in preparation for impending plowing. Not installed in soil yet. |
| 2023-05-03 | 10861 | HFP01 | Installed | Heat Flux Plate C | Installed in soil under tower at 2cm depth. |
| 2017-04-26 | 10867 | HFP01 | Installed | Heat Flux Plate B | Installed at the Bouldin Corn site with the initial set up of the tower. Temporarily at the south edge of the scaffolding until tractor work is finished. |
| 2019-12-02 | 10867 | HFP01 | Removed | Heat Flux Plate B | Removed from Bouldin Corn site and brought back to the lab after the tower fell down during a rain/wind storm on 2019-11-26. |
| 2019-12-13 | 10867 | HFP01 | Installed | Heat Flux Plate B | Re-installed at Bouldin Corn after re-assembling tower. Need to check if this in A/B/C location. |
| 2020-05-19 | 10867 | HFP01 | Moved | Heat Flux Plate B | Moved back into the field from being under the scaffolding at the side of the field for tilling and planting. |
| 2020-09-01 | 10867 | HFP01 | Moved | Heat Flux Plate B | Moved tower and soil sensors back from field in preparation for corn harvest. Soil sensors were reinstalled under the tower at -2cm depth. |
| 2023-04-26 | 10867 | HFP01 | Moved | Heat Flux Plate B | Moved from field to tower in preparation for impending plowing. Not installed in soil yet. |
| 2023-05-03 | 10867 | HFP01 | Installed | Heat Flux Plate B | Installed in soil under tower at 2cm depth. |
| 2017-04-26 | 11326 | HFP01 | Installed | Heat Flux Plate A | Installed at the Bouldin Corn site with the initial set up of the tower. Temporarily at the south edge of the scaffolding until tractor work is finished. |
| 2019-12-02 | 11326 | HFP01 | Removed | Heat Flux Plate A | Removed from Bouldin Corn site and brought back to the lab after the tower fell down during a rain/wind storm on 2019-11-26. |
| 2019-12-13 | 11326 | HFP01 | Installed | Heat Flux Plate A | Re-installed at Bouldin Corn after re-assembling tower. Need to check if this in A/B/C location. |
| 2020-05-19 | 11326 | HFP01 | Moved | Heat Flux Plate A | Moved back into the field from being under the scaffolding at the side of the field for tilling and planting. |
| 2020-09-01 | 11326 | HFP01 | Moved | Heat Flux Plate A | Moved tower and soil sensors back from field in preparation for corn harvest. Soil sensors were reinstalled under the tower at -2cm depth. |
| 2023-04-26 | 11326 | HFP01 | Moved | Heat Flux Plate A | Moved from field to tower in preparation for impending plowing. Not installed in soil yet. |
| 2023-05-03 | 11326 | HFP01 | Installed | Heat Flux Plate A | Installed in soil under tower at 2cm depth. |