Equipment and Calibration
Equipment history at Bouldin Alfalfa| ALL | | Anemometer || Barometer || Camera || Data Logger || Flux Analyzer || Forced Diffusion || Gas Analyzer || Heat Flux Plate || Infrared Temperature || Interface || Multiplexer || Narrow Band || Net Radiometer || PAR Sensor || Precipitation || Range Finder || RH & Temp || Soil Moisture Probe || Solar Controller || Solar Panel || Weather Station |
SELECT a.recno, a.eh_date, a.eh_loc1, a.eh_loc2, IF(a.eh_loc2=:loc, a.eh_locref2, a.eh_locref1) AS ref, a.eh_locref2, a.eh_title, a.eh_notes, a.eh_id, b.serialno, b.equip, b.modelno FROM equiphist a INNER JOIN equiplist b ON a.eh_id=b.recno WHERE (a.eh_loc1=:loc1 OR a.eh_loc2=:loc2) AND b.equip=:eq ORDER BY b.serialno, a.eh_date
| Date | Serial No. | Model | Action | Ref | Notes |
|---|---|---|---|---|---|
| Heat Flux Plate | |||||
| 2016-08-12 | 10866 | HFP01 | Installed | Heat Flux Plate A | Installed with the initial set up of the site. |
| 2024-10-09 | 10866 | HFP01 | Removed | Heat Flux Plate A | Removed from BA tower and brought back to the lab. The BA field is getting plowed. |
| 2024-10-24 | 10866 | HFP01 | Installed | Heat Flux Plate A | Installed in the field after wheat was planted |
| 2016-08-12 | 11332 | HFP01 | Installed | Heat Flux Plate C | Installed with the initial set up of the site. |
| 2024-10-09 | 11332 | HFP01 | Removed | Heat Flux Plate C | Removed from BA tower and brought back to the lab. The BA field is getting plowed. This sensor got hit by the plow and the wire was cut, but we recovered the sensor. |
| 2024-10-24 | 11332 | HFP01 | Installed | Heat Flux Plate C | Installed in the field after wheat was planted |
| 2016-08-12 | 11334 | HFP01 | Installed | Heat Flux Plate B | Installed with the initial set up of the site. |
| 2016-10-06 | 11334 | HFP01 | Removed | Heat Flux Plate B | Removed with soil sensor Set B from Bouldin Alfalfa. This set was hit by a mower. |
| 2016-11-22 | 11334 | HFP01 | Installed | Heat Flux Plate B | Reinstalled at the Bouldin Alfalfa tower. This SHF plate was installed about 1m west of the tower at about 1cm deep. |
| 2024-10-09 | 11334 | HFP01 | Moved | Heat Flux Plate B | BA tower was moved temporarily to the edge of the field by the ditch to make way for plowing/planting. This sensor was removed from the field and reinstalled under the temporary tower location. |
| 2024-10-24 | 11334 | HFP01 | Moved | Heat Flux Plate B | Moved from under the tower into the field after wheat was planted |