Equipment and Calibration
Equipment history at East End| ALL | | Anemometer || Barometer || Battery Bank || Camera || CO2 Probe || Conductivity Sensor || Data Logger || DO Sensor || Gas Analyzer || Heat Flux Plate || Interface || Multiplexer || Narrow Band || Net Radiometer || PAR Sensor || Precipitation || RH & Temp || Solar Controller || Solar Panel || Spectrometer || Water Level |
SELECT a.recno, a.eh_date, a.eh_loc1, a.eh_loc2, IF(a.eh_loc2=:loc, a.eh_locref2, a.eh_locref1) AS ref, a.eh_locref2, a.eh_title, a.eh_notes, a.eh_id, b.serialno, b.equip, b.modelno FROM equiphist a INNER JOIN equiplist b ON a.eh_id=b.recno WHERE (a.eh_loc1=:loc1 OR a.eh_loc2=:loc2) AND b.equip=:eq ORDER BY b.serialno, a.eh_date
| Date | Serial No. | Model | Action | Ref | Notes |
|---|---|---|---|---|---|
| DO Sensor | |||||
| 2017-08-02 | 1219 | miniDOT | Moved | DO Sensor | The miniDOT was moved with the Hobo conductivity sensor from the T3 Boardwalk Temporary Tower to the Permanent Tower. |
| 2017-09-13 | 1219 | miniDOT | Moved | DO Sensor | Moved from the Permanent Tower to the T2 Closed Canopy Temporary Tower |
| 2017-11-10 | 1219 | miniDOT | Installed | DO Sensor | Installed at East End hanging from the north side of the scaffolding |
| 2018-07-12 | 1219 | miniDOT | Removed | DO Sensor | Brought back to the lab to replace batteries. |
| 2018-07-17 | 1219 | miniDOT | Installed | DO Sensor | Turned on and reinstalled with fresh batteries. The water level is very low so the sensor end is just sitting on the muck. |
| 2024-10-23 | 1219 | miniDOT | Removed | DO Sensor | Removed from EE and brought back to the lab to set its clock |
| 2024-11-05 | 1219 | miniDOT | Installed | DO Sensor | Reinstalled after a trip to the lab for a clock reset, fresh desiccant, and new batteries. |
| 2014-04-10 | DO-06 | DO6400/T | Installed | DO Sensor | Installed DO probe at East End |
| 2016-10-11 | DO-06 | DO6400/T | Removed | DO Sensor | Removed from East End for service. It was out od the water, reading high and had bite marks on the cable. |
| 2016-10-26 | DO-06 | DO6400/T | Installed | DO Sensor | Re-installed at East End tower after testing in the lab. |
| 2018-12-06 | DO-06 | DO6400/T | Removed | DO Sensor | Removed from East End because it was not working and has been made obsolete by MiniDot sensor. |