Equipment and Calibration
Equipment history at Bouldin Corn| ALL | | Air Quality Sensor || Anemometer || Barometer || Camera || Data Logger || Forced Diffusion || Gas Analyzer || Heat Flux Plate || Infrared Temperature || Interface || Multiplexer || Narrow Band || Net Radiometer || PAR Sensor || Precipitation || Range Finder || RH & Temp || Soil Moisture Probe || Solar Controller || Water Level || Weather Station |
SELECT a.recno, a.eh_date, a.eh_loc1, a.eh_loc2, IF(a.eh_loc2=:loc, a.eh_locref2, a.eh_locref1) AS ref, a.eh_locref2, a.eh_title, a.eh_notes, a.eh_id, b.serialno, b.equip, b.modelno FROM equiphist a INNER JOIN equiplist b ON a.eh_id=b.recno WHERE (a.eh_loc1=:loc1 OR a.eh_loc2=:loc2) AND b.equip=:eq ORDER BY b.serialno, a.eh_date
| Date | Serial No. | Model | Action | Ref | Notes |
|---|---|---|---|---|---|
| Camera | |||||
| 2017-07-12 | 0030F4D21491 | SD130BN | Installed | Camera | This camera was put up on the Bouldin Corn Tower. It was attached to the southwest corner of the scaffolding just below the top railing and connected the to NL115 on the CR1000 to record the images on a CFM card. The CR1000 IP was set to 192.168.2.100 and the FTP user=Tower and pw=biomet. |
| 2019-12-02 | 0030F4D21491 | SD130BN | Removed | Camera | Removed from Bouldin Corn site and brought back to the lab after the tower fell down during a rain/wind storm on 2019-11-26. |
| 2019-12-13 | 0030F4D21491 | SD130BN | Installed | Camera | Re-installed at Bouldin Corn after re-assembling tower. |
| 2021-01-29 | 0030F4D21491 | SD130BN | Removed | Camera | Removed due to the tower falling over in the storm near midnight on 2021-01-26/27. Completely submerged |
| 2021-02-03 | 0030F4D21491 | SD130BN | Installed | Camera | Reinstalled on the BC tower after cleaning and inspection in the lab after being removed after the tower fell last week |
| 2020-05-19 | RPI0W-001 | RPI0W | Installed | none | Installed at BC on the ground in a normal-density corn patch, looking upwards. |
| 2020-07-30 | RPI0W-001 | RPI0W | Removed | Removed from BC and brought back to the lab because the corn canopy is about done developing for the season | |
| 2021-05-27 | RPI0W-001 | RPI0W | Installed | none | Installed under the corn canopy at BC. This camera is in line with a row. |
| 2021-08-17 | RPI0W-001 | RPI0W | Removed | Removed from the BC field and brought back to the lab since the canopy has finished developing for this year | |
| 2022-05-27 | RPI0W-001 | RPI0W | Installed | camera B | Installed in line with a corn row. |
| 2022-06-08 | RPI0W-001 | RPI0W | Removed | camera B | This camera was dead. There was a puddle of water in the bottom of the enclosure and white corrosion all over the board and mini-USB connector. |
| 2020-05-19 | RPI0W-002 | RPI0W | Installed | none | Installed at BC on the ground in a normal-density corn patch, looking upwards. |
| 2020-07-30 | RPI0W-002 | RPI0W | Removed | Removed from BC and brought back to the lab because the corn canopy is about done developing for the season | |
| 2021-05-27 | RPI0W-002 | RPI0W | Installed | none | Installed under the corn canopy at BC. This camera is between rows. |
| 2021-08-17 | RPI0W-002 | RPI0W | Removed | Removed from the BC field and brought back to the lab since the canopy has finished developing for this year | |
| 2022-05-27 | RPI0W-002 | RPI0W | Installed | Camera C | Installed between corn rows |
| 2022-08-31 | RPI0W-002 | RPI0W | Removed | Camera C | Removed this zcam from BC and brought back to the lab since the corn canopy has finished development and we won't get any more interesting photos |
| 2023-05-31 | RPI0W-002 | RPI0W | Installed | none | Installed in the corn field at BC for the 2023 growing season |
| 2023-08-24 | RPI0W-002 | RPI0W | Removed | Camera C | Removed from the z-cam location because the corn is finished growing |
| 2024-05-22 | RPI0W-002 | RPI0W | Installed | none | Installed in the Bouldin corn field on the ground to capture gap fraction through the growing season. Tractor work should be done for now and plants are 5-10cm tall. |
| 2024-08-30 | RPI0W-002 | RPI0W | Removed | camera B | Zcam removed from field because sorghum canopy has finished development |
| 2020-05-19 | RPI0W-004 | RPI0W | Installed | none | Installed at BC on the ground in a normal-density corn patch, looking upwards. This camera has a regular lens, and we will compare the photos with 2 picams with fisheye lenses. |
| 2020-07-30 | RPI0W-004 | RPI0W | Removed | Removed from BC and brought back to the lab because the corn canopy is about done developing for the season | |
| 2023-05-31 | RPI0W-007 | RPI0W | Installed | none | Installed in the corn field at BC for the 2023 growing season |
| 2023-08-24 | RPI0W-007 | RPI0W | Removed | camera B | Removed from the z-cam location because the corn is finished growing |
| 2024-05-22 | RPI0W-007 | RPI0W | Installed | none | The clock was bad after being off overnight, so I changed the RTC battery (CR1225) and reset the clock. Installed in the Bouldin corn field on the ground to capture gap fraction through the growing season. Tractor work should be done for now and plants are 5-10cm tall. |
| 2024-08-30 | RPI0W-007 | RPI0W | Removed | Camera C | Zcam removed from field because sorghum canopy has finished development |
| 2025-05-29 | RPI0W-009 | RPI0W | Installed | camera B | Installed as and upward looking gap fraction cam with wide angle lens. |
| 2025-05-29 | RPI0W-010 | RPI0W | Installed | Camera C | Installed as and upward looking gap fraction cam with wide angle lens. |