Equipment and Calibration
Equipment history at Sherman Wetland| ALL | | Anemometer || Barometer || Battery Bank || Camera || CO2 Probe || Conductivity Sensor || Data Logger || DO Sensor || Gas Analyzer || Heat Flux Plate || Interface || Multiplexer || Narrow Band || Net Radiometer || PAR Sensor || Precipitation || RH & Temp || Solar Controller || Solar Panel || Water Level || Weather Station |
SELECT a.recno, a.eh_date, a.eh_loc1, a.eh_loc2, IF(a.eh_loc2=:loc, a.eh_locref2, a.eh_locref1) AS ref, a.eh_locref2, a.eh_title, a.eh_notes, a.eh_id, b.serialno, b.equip, b.modelno FROM equiphist a INNER JOIN equiplist b ON a.eh_id=b.recno WHERE (a.eh_loc1=:loc1 OR a.eh_loc2=:loc2) AND b.equip=:eq ORDER BY b.serialno, a.eh_date
| Date | Serial No. | Model | Action | Ref | Notes |
|---|---|---|---|---|---|
| CO2 Probe | |||||
| 2017-08-16 | GP20140016 | GP-001 | Installed | CO2 Probe | Installed at SW. I waterproofed the cable-sensor connection with multiple layers of liquid electrical tape and silicone caulk. |
| 2018-10-18 | GP20140016 | GP-001 | Removed | CO2 Probe | Removed from Sherman Wetland due to railed readings not responding the atmospheric CO2. |
| 2018-11-01 | GP20140084 | GP-001 | Installed | CO2 Probe | Installed at SW to replace sn GP20140016, which was removed b/c it was maxing out. |
| 2021-01-17 | GP20140084 | GP-001 | Removed | CO2 Probe | Removed from SW and brought back to the lab b/c the sensor is bad and only outputting noise |
| 2016-05-24 | GP20150101 | GP-001 | Installed | CO2 Probe | Installed on the Sherman Wetland tower at the initial set up of the site. In the air unil the site is flooded. |
| 2017-08-16 | GP20150101 | GP-001 | Removed | CO2 Probe | Removed from SW because it did not have a waterproof sensor-cable connection. |