Equipment and Calibration
Equipment history at Hill Slough| ALL | | Anemometer || Battery Bank || Camera || CO2 Probe || Conductivity Sensor || Data Logger || DO Sensor || Fluorometer || Forced Diffusion || Gas Analyzer || Heat Flux Plate || Interface || Multiplexer || Narrow Band || Net Radiometer || PAR Sensor || pH ORP || Precipitation || Range Finder || RH & Temp || Soil Moisture Probe || Solar Controller || Solar Panel || Water Level || Wiper |
SELECT a.recno, a.eh_date, a.eh_loc1, a.eh_loc2, IF(a.eh_loc2=:loc, a.eh_locref2, a.eh_locref1) AS ref, a.eh_locref2, a.eh_title, a.eh_notes, a.eh_id, b.serialno, b.equip, b.modelno FROM equiphist a INNER JOIN equiplist b ON a.eh_id=b.recno WHERE (a.eh_loc1=:loc1 OR a.eh_loc2=:loc2) AND b.equip=:eq ORDER BY b.serialno, a.eh_date
| Date | Serial No. | Model | Action | Ref | Notes |
|---|---|---|---|---|---|
| CO2 Probe | |||||
| 2021-11-04 | GP20160127 | GP-001 | Installed | CO2 Probe | Installed near the miniDot on the SW corner of the platform. This sensor floats so that the sensor window is about 10cm below the water surface. There is enough slack in the cable so it can go down some more with a lower tide, but hard to say where it will be with higher tides. |
| 2022-08-24 | GP20160127 | GP-001 | Moved | CO2 Probe | Moved from the Hill Slough main tower to the channel about 40m east of the main tower. At the tower, the sensor was above water during low tide so we moved the sensor into deeper water where it will remain submerged during low tide. |