Equipment and Calibration

Equipment history at Gilbert Tract

| ALL | | Anemometer || Barometer || Battery Bank || Camera || CH4 Probe || CO2 Probe || Conductivity Sensor || Data Logger || DO Sensor || Flowmeter || Fluorometer || Gas Analyzer || Heat Flux Plate || Infrared Temperature || Interface || Multiplexer || Narrow Band || Net Radiometer || PAR Sensor || pH ORP || Precipitation || Range Finder || RH & Temp || Solar Controller || Solar Panel || Water Level || Weather Station || Wiper |

SELECT a.recno, a.eh_date, a.eh_loc1, a.eh_loc2, IF(a.eh_loc2=:loc, a.eh_locref2, a.eh_locref1) AS ref, a.eh_locref2, a.eh_title, a.eh_notes, a.eh_id, b.serialno, b.equip, b.modelno FROM equiphist a INNER JOIN equiplist b ON a.eh_id=b.recno WHERE (a.eh_loc1=:loc1 OR a.eh_loc2=:loc2) AND b.equip=:eq ORDER BY b.serialno, a.eh_date

Date Serial No. Model Action Ref Notes
CO2 Probe
2023-11-28 GP20160117 GP-001 Installed CO2 Probe Installed at GT to replace GP20210002, which was removed b/c of noisy data.
2021-09-09 GP20200089 GP-001 Installed CO2 Probe Installed at Gilbert Tract but the cable was too short - not hooked up until 2021-09-15
2023-03-23 GP20200089 GP-001 Removed CO2 Probe Removed from Gilbert Tract (was installed by the staff gauge) and brought back to the lab for testing. I think this sensor is dead.
2023-03-23 GP20210002 GP-001 Installed CO2 Probe Installed at Gilbert Tract on a post (just off the far end of the boardwalk) with the other water quality sensors. Should be at the same height as before (about 5cm above the soil)
2023-11-28 GP20210002 GP-001 Removed CO2 Probe Removed from GT because of noisy data. Replaced by GP20160117.
Export to BADM