Equipment and Calibration
Equipment history at East End| ALL | | Anemometer || Barometer || Battery Bank || Camera || CO2 Probe || Conductivity Sensor || Data Logger || DO Sensor || Gas Analyzer || Heat Flux Plate || Interface || Multiplexer || Narrow Band || Net Radiometer || PAR Sensor || Precipitation || RH & Temp || Solar Controller || Solar Panel || Spectrometer || Water Level |
SELECT a.recno, a.eh_date, a.eh_loc1, a.eh_loc2, IF(a.eh_loc2=:loc, a.eh_locref2, a.eh_locref1) AS ref, a.eh_locref2, a.eh_title, a.eh_notes, a.eh_id, b.serialno, b.equip, b.modelno FROM equiphist a INNER JOIN equiplist b ON a.eh_id=b.recno WHERE (a.eh_loc1=:loc1 OR a.eh_loc2=:loc2) AND b.equip=:eq ORDER BY b.serialno, a.eh_date
| Date | Serial No. | Model | Action | Ref | Notes |
|---|---|---|---|---|---|
| CO2 Probe | |||||
| 2014-06-26 | GP20140011 | GP-001 | Installed | CO2 probe | Installed at the East End tower. |
| 2015-06-25 | GP20140011 | GP-001 | Removed | CO2 probe | Removed this 2% probe from East End. Replaced by 4% probe sn GP20140021. |
| 2018-04-20 | GP20140019 | GP-001 | Installed | CO2 probe | Installed at EE. The previous probe had been brought back to the lab at the last site visit b/c it was unresponsive. |
| 2019-01-03 | GP20140019 | GP-001 | Removed | CO2 probe | Removed and brought back to the lab for testing. |
| 2015-06-25 | GP20140021 | GP-001 | Installed | CO2 probe | Installed this 4% probe at East End due to replaced 2% probe sn GP20140011. |
| 2015-12-08 | GP20140021 | GP-001 | Removed | CO2 probe | This 4% CO2 probe was removed from East End. It was replaced by an 8% probe sn GP20150109 |
| 2019-01-18 | GP20150101 | GP-001 | Installed | CO2 probe | Installed at EE to replace sn GP20140019, which was brought back to the lab for testing. |
| 2019-07-10 | GP20150101 | GP-001 | Removed | CO2 probe | Removed from EE and brought back to the lab for further testing (it was maxing out, even when out of the water). |
| 2015-12-08 | GP20150109 | GP-001 | Installed | CO2 probe | This 8% probe was installed at East End to replace a 4% probe sn GP20140021 |
| 2016-11-21 | GP20150109 | GP-001 | Removed | CO2 probe | Removed from East End where it was pulling about 6A of power and browning out the entire site. |
| 2019-09-04 | GP20160096 | GP-001 | Installed | CO2 probe | The CO2 probe attached to the plastic chain to hang next to the miniDot. |
| 2019-09-18 | GP20160096 | GP-001 | Removed | CO2 probe | Removed from East Pond because it was railed high even in air. |
| 2019-10-02 | GP20160096 | GP-001 | Installed | CO2 probe | Installed at EE off the north side of the tower. |
| 2020-10-05 | GP20160096 | GP-001 | Removed | CO2 probe | Removed from EE because it still rails high in air and in water. Will send it back to the factory |