Equipment and Calibration
Equipment history at West Pond| ALL | | Anemometer || Barometer || Battery Bank || Camera || CO2 Probe || Conductivity Sensor || Data Logger || DO Sensor || Gas Analyzer || Interface || Multiplexer || Narrow Band || Net Radiometer || PAR Sensor || RH & Temp || Solar Controller || Solar Panel || Water Level || Weather Station |
SELECT a.recno, a.eh_date, a.eh_loc1, a.eh_loc2, IF(a.eh_loc2=:loc, a.eh_locref2, a.eh_locref1) AS ref, a.eh_locref2, a.eh_title, a.eh_notes, a.eh_id, b.serialno, b.equip, b.modelno FROM equiphist a INNER JOIN equiplist b ON a.eh_id=b.recno WHERE (a.eh_loc1=:loc1 OR a.eh_loc2=:loc2) AND b.equip=:eq ORDER BY b.serialno, a.eh_date
| Date | Serial No. | Model | Action | Ref | Notes |
|---|---|---|---|---|---|
| Anemometer | |||||
| 2012-10-18 | 000603 | SATI-3K | Installed | Anemometer ATI | Removed from the Sherman tower and installed on the West Pond. The Sherman system was returned to configuration before installing the ATI. At West Pond, the ATI was installed northeast of the Gill WMP just west (and upwind) of the LI7500. The data is recorded by a separate CR1000 in the box that Robin supplied with the ATI. |
| 2012-11-08 | 000603 | SATI-3K | Removed | Anemometer ATI | Removed from West Pond after a three week inter-comparison. |
| 2012-05-02 | 120907 | WM 1590 | Installed | Anemometer | Installed on folding boom at the top of the tower. |
| 2017-01-17 | 120907 | WM 1590 | Removed | Anemometer | Removed from West Pond and returned to lab for firmware upgrade. It was replaced by sn 120908. |
| 2017-01-17 | 120908 | WM 1590 | Installed | Anemometer | Installed on West Pond tower to replace sn 120907. |
| 2024-02-28 | 120908 | WM 1590 | Removed | Anemometer | Removed from WP as part of its decomissioning |