Equipment and Calibration

Equipment history at Bouldin Corn

| ALL | | Air Quality Sensor || Anemometer || Barometer || Camera || Data Logger || Forced Diffusion || Gas Analyzer || Heat Flux Plate || Infrared Temperature || Interface || Multiplexer || Narrow Band || Net Radiometer || PAR Sensor || Precipitation || Range Finder || RH & Temp || Soil Moisture Probe || Solar Controller || Water Level || Weather Station |

SELECT a.recno, a.eh_date, a.eh_loc1, a.eh_loc2, IF(a.eh_loc2=:loc, a.eh_locref2, a.eh_locref1) AS ref, a.eh_locref2, a.eh_title, a.eh_notes, a.eh_id, b.serialno, b.equip, b.modelno FROM equiphist a INNER JOIN equiplist b ON a.eh_id=b.recno WHERE (a.eh_loc1=:loc1 OR a.eh_loc2=:loc2) AND b.equip=:eq ORDER BY b.serialno, a.eh_date

Date Serial No. Model Action Ref Notes
Anemometer
2024-02-14 022365410 SONIC-ANEMO-SPE10 Installed none Installed at Bouldin Corn with a new, udpated Mark 3, sn D006617.
2017-04-26 074417 WM 1590 Installed Anemometer Installed at 5.2m agl at the Bouldin Corn site with the initial set up of the tower.
2019-12-02 074417 WM 1590 Removed Anemometer One traducer missing. Removed from Bouldin Corn site and brought back to the lab after the tower fell down during a rain/wind storm on 2019-11-26.
2021-02-03 153803 WM 1590 Installed Anemometer Installed on the BC tower to replace sensors damaged when the tower fell last week
2019-12-13 153805 WM 1590 Installed Anemometer Installed at Bouldin Corn after re-assembling tower. This unit replaces sn 074417 that lost a transducer when the tower fell.
2021-01-29 153805 WM 1590 Removed Anemometer Removed due to the tower falling over in the storm near midnight on 2021-01-26/27. Partially submerged
Export to BADM